Cleaning natural stone with a pressure washer Considered

Work will be cleaned in the decorative brick or natural stone needs, but are afraid that might hurt? You should be tired, because it very easy to damage if not cleaned properly. Incorrect use of cleaning chemicals can discolor it, destroy and ruin. Using the wrong type of brush can do the same. Be cleaned with a pressure washer would be the best solution, but if you use the wrong pressure points, all bets off on this issue.

The largestProblem by using a pressure washer comes from inappropriate choice of the wrong advice. For example, dig a "zero point" a horrible hole that is just terrible when you try to hang a hole in an iron still somewhat boring. Could cut the zero point the finger of someone if they have been used as a weapon. Another common advice is on top of 15 degrees, pressure washers use about everyone, including small electrical appliances often have these Chinese-built house.

And even if these small800-1500 psi units only, with a peak value equal to zero, if you get too close to natural stone, it can easily lead to permanent damage. So, I suggest you keep the pressure wall 12 inches away at any time during the cleaning of brick and choose nature to a high of 25 degrees or more, I recommend a gratuity of 45 degrees, just go to the safe side .

The second problem with people who clean natural sound, with the wrong chemicals that can permanently stain is brick, so it is bestWash with a semi-soft brush, soap and water 45 degrees and a bit of pressure at the end of the gun or wand. Please take this into account.

Source: http://home-improvement-stone-brick.chailit.com/cleaning-natural-stone-with-a-pressure-washer-considered.html

alexis bledel athena mason time warner nightmare on elm street coldplay tina turner